장비 그룹 Co., 주식 회사를 만드는 Newlead 철사와 케이블
30년 이상 철사와 케이블 공업을 위한 최상 기술의.
 
|
| 원래 장소: | 중국 |
| 브랜드 이름: | NEWLEAD |
| 인증: | ISO CE |
| 모델 번호: | 13D/2 |
| 최소 주문 수량: | 1 세트 |
|---|---|
| 포장 세부 사항: | 나무로 되는 깔판 |
| 배달 시간: | 4 달 |
| 지불 조건: | L/C, 서부 동맹 |
| 공급 능력: | 4개월에 10개 세트 |
| 이름: | 이중-와이어는 두 몹시 꾸짖음 코일러 또는 두배 스풀러와 로드 고장 기계와 온라인 풀림하는 옵션을 구리도금합니다 | 용법: | Drawing,Drawing+Annealing |
|---|---|---|---|
| 품질: | 유럽 품질 | 전압: | 220-480V |
| 재료: | 구리 철사 | 힘: | 700KW |
| annealer: | 55V,10000A | 능력: | 2.6 밀리미터. 5500KG/h |
| 최고 속도: | 25m/s | 그림은 지나갑니다: | 맥스 13 |
| 하이 라이트: | 700KW 구리 로드 고장 기계,5500KG/H 구리 로드 고장 기계,8.0 밀리미터 신선기 |
||
Dual wires copper rod breakdown machine with two set down coiler or double spooler and online annealing options
Advantages of this safe investment choice
Increase in quality:
High surface quality of the wires due to the optimized wire path (2° inclination of the gearing/drawing capstans) innovative drawing die holders with high-pressure cooling of the drawing dies
Increase in productivity:
Reduced downtime when changing the machine setup for different dimensions via multi-SERVO motor drive technology (quick drawing die change system)
Reduced downtime due to touch screen-
Based user guidance and fault display
Cost-effectiveness:
Reduced tool consumption (drawing capstans, drawing dies) with minimized-slip operation energy savings of up to 20% are achieved by switching off unused drives long service intervals and extended drawing tool service life minimize the requirement to stock and use spare parts
Reduced consumption of oil and drawing lubricant
Design:
Optimized wire cooling/lubrication (due to the fully-immersed drawing basin) flexible adjustment of the wire elongation per draft
Individually driven drawing shafts in horizontal tandem layout three-phase AC drives, water-cooled and maintenance-free
Ergonomic and user-friendly machine design, with easy maintenance
no noise protection cabin required up to 85 dB (A) helically geared precision gearing for extremely smooth operation and uniform load transmission vibration-damping grey cast iron housing for long service life
Highly reliable separation of drawing emulsion and gear oil via mechanical seal (long service intervals)
2,TECHNICAL PARAMETER
| 2.1 | Inlet wire | Φ8.0mm |
| 2.2 | Outlet wire | Φ1.2－Φ4.0mm |
| 2.3 | Max speed of drawing | 25m/s |
| 2.4 | Drawing block size | Φ450mm |
| 2.5 | Max number of passes | 13 |
| 2.6 | Die dimension | Φ38x25 |
| 2.7 | Capacity of the accumulator | 7m |
| 2.8 | Double Spooler bobbin size | PND630 |
| 2.9 | Main motor power | 37kW (AC) X5, 30kWX7(AC) |
| 2.10 | Power of motor for constantspeed wheel | 55kW (AC) |
| 2.11 | Power of motor for spooler | 18.5kW×2 (AC) |
| 2.12 | Installation size | 36000×4200×5000mm |
| 2.13. | Down Coiler | Φ800mm |
| 2.14. | Annealer power | 55V,6000A (DC) |
3, MACHINE COMPONENTS
| 3.1 | Cantilever payoff stand | 1set |
| 3.2 | Main drawing machine | 1set |
| 3.3 | Continuous annealing device | 1set |
| 3.4 | Dancer | 1set |
| 3.5 | PND630 Automatic spooler | 1set |
| 3.6 | Pointing machine | 1set |
| 3.7. | Φ900 Down Coiler | 1set |
| 3.8 | Drawing emulsion system | 1set |
| 3.9 | Electric cabinet and control desk | 1set |
Others
1. Paint:Paint after rustproof production according to our standards or customer’s requirements
2. The consumables:Capstan; Distributing guide pulleys; Traversing guide pulleys; Flat belts
3. The period of guarantee:
12 months for mechanical part (excluding the consumables) after the shipment;
6 months for electrical parts after the shipment
Permanent maintenances (charge)
4. Commission:
A. Idle-running test will be carried out at our plant with no rough material fed. An acceptance test will be carried out with rough material fed at buyer's request.
B. Running-test is carried out at buyers' plant, all of the charge for the testers including flight ticket, traffic, salary, accommodation outside makers' plant shall be paid by the buyer.(USD80/DAY)
C. The buyer supplies all the material for the test, such as Bobbin(Drum), gear oil, Lubricant oil, Dies, Butt welder, Raw Material, Air compressor, test equipment ,etc. are excluded.
5. Maintenance: we offer long-distance mechanical support for free; If the engineers are needed to be the buyer’s company for maintenance, the buyer offers flight ticket (SHANGHAI), board and lodging.(USD 100 /day, per engineer)
6.Standard export packing for shipping
SPECAIL STATEMENT
All information above are carefully checked, our company reserve explain right if any printing mistake or any misunderstanding.
Another: Sorry for noting no advanced notice for the techniques improvement or upgrade on the machine; any change on the appearance or color, please refer to the real object.
담당자: admin
전화 번호: +8618913191585
찬 용접 중간 철사 그림 기계, 손 파악 철사 막대 그림 기계
14DG/24DG 정밀한 철사 0.25에 0.5mm 및 0.08에서 0.25mm를 위한 구리 최고 그림 기계
자동적인 두 배 얼레 철사 그림 기계, 기계를 만드는 11KW+4KW 구리 철사
고능률 구리 철사 밀어남 기계, 주문을 받아서 만들어진 철사 제조 기계
13D 알루미늄 막대 고장 기계 고속 디자인 인레트 9.5mm 출구 1.7-5.5mm
알루미늄 막대 그림 기계 단 하나 얼레/아래로 두 배 얼레 코일어 선택권
막대 고장 구리 철사 그림 기계 고속 인레트 8mm 출구 1.2-4.0mm 1.6-4.0mm 2.2-4.0mm
